If you are a gamer or computer enthusiast, It is sure that you were familiar with the label “CPU cooler” and “GPU backplate”.
These are the two main components found in every CPU which are used to maintain the temperature of the CPU or GPU and control the heat produced by both components.
GPU backplate is attached to the Graphic processing unit and the CPU cooler is attached to the central processing unit. Both are vital to control the heat and give the best performance.
Anyhow, the main point is that the CPU cooler has any type of contact with the GPU backplate. In this blog, I will explain the answer to this question.
And I’ll explain all the facts and figures which is necessary for you regards the statement mentioned above: CPU cooler touching GPU backplate.
What is CPU Cooler touching GPU backplate?
In the architecture of the computer, every component is designed specifically and with full attention which not damaged any other part of the computer.
CPU cooler or GPU backplate both are essential components of the computer system and plays a vital role in the CPU or GPU.
Yes, the CPU cooler or GPU backplate may contact each other. But this is happening under some circumstances.
It happens due to the design of the motherboard, the dimension of placing both parts and the size also play an important role in contracting between the CPU and GPU backplate.
Factors that influence contact:
Some factors which help in corresponding between the CPU cooler and GPU backplate are the:
Motherboard Layout:
In some cases, the motherboard is designed in a way that the CPU chip is very close to the GPU. In this scenario, there is a great chance of touching the GPU and CPU cooler.
GPU backplate design:
There are lots of companies which manufacture the parts of the computer. Every organization chooses its designs which differ in size, placement, and orientation.
Some have the raised areas and some have a flat surface. These factors may become a reason for coherence.
CPU cooler height:
It is a major factor of interaction between the cooler and the backplate. Sometimes, cooler height is more than the case and it may disturb the parts near the CPU.
Some other issues during the installation which make contact between both components are:
Cooler dimensions:
Some CPU coolers have larger heatsinks or protrusions that can extend beyond the socket area, making it more likely to touch the backplate.
Incorrect Installation:
If you don’t hire a professional to fix the cooler, then there is a chance that he doesn’t install it properly which disturbs other components and makes contact with the GPU.
If you notice any type of issue, you may need to check your CPU cooler and fix it in the correct position or change the cooler according to your motherboard.
Is It Fine for My CPU Cooler to Touch My GPU, or Is It a Hazard?
It is fine to interact the cooler with the GPU but it is only useful when they interact to a small extent and it does make a lot of pressure on the GPU.
In a small connection, heat is transferred easily and doesn’t affect heat regulation.
But in some rare cases, Cooler makes pressure on the GPU backplate which blocks the transfer of heat, which may damage the motherboard permanently.
In case of the major load of CPU cooler on GPU, may lead to several hazards:
Airflow Restriction:
If the CPU cooler makes a barrier between the airflow junction and the GPU, it makes a bad impact on other components like graphic cards. As a result, the temperature rises and the performance of the motherboard is reduced.
Vibration and Noices:
Sometimes, interaction can make a different type of extra noise or vibration inside the motherboard. These noises cause disturbance and make an extra burden on ear canals.
Component damage:
Continuous rubbing of the cooler with the parts of the motherboard can make scratches, reduce efficiency, affect performance, or may damage the whole section of the computer system.
Heat Transfer Efficiency:
Excessive pressure between the CPU cooler and GPU backplate can hinder the effectiveness of heat transfer, resulting in higher temperatures for both components.
I discussed some major issues above that you may face if your cooler has interacted with the GPU.
I must say that you should install the cooler which is specifically designed according to your motherboard. By doing this you cannot have any tyr of danger to bear any problem.
And efficiency is not affected if you follow precautionary measures before installation.
Final Thoughts:
CPU and GPU are the components that produce heat while they are running. And maintaining them at an optimal temperature is very essential.
Maintaining their temperature is very important to get the proper efficiency in the computer performance.
The contraction between the CPU cooler and GPU causes some major hazards sometimes.
To prevent yourself or your gadget from any type of danger, you should choose a cooler that is designed according to the motherboard’s cause.
Or have the adjustable size which cannot damage any other component. Make sure to regularly check the proper functioning of your computer.
FAQ’S
1. What should I do if my CPU cooler is already touching the GPU backplate?
If you are noticing any issue like this, You must try to adjust the position of the CPU cooler. Alternatively, consider replacing the CPU cooler with a model that offers better compatibility and sufficient space to avoid contact.
2. Can I use a CPU cooler that touches the GPU backplate if it doesn’t cause any issues?
If there is minimal contact between the CPU cooler and the GPU, then you can do it as it is without any fear. Because it doesn’t make any pressure on the GPU and does not affect the efficiency of performance.
Related Articles
